safholland
Applications
 
 
PRODUCTS & APPLICATIONS
Products
 
Axles
Mechanical Suspensions
Air Suspensions
Couplers
Landing Gears
Accessories
Others
Applications
Solutions
New Products
 
 
Developing total suspension and axle solutions for the semi-trailer and road tanker industry
 
Latest Range
Superior Quality
Widest Choice
Customisation Available
Competitive Price
 
YORK policy is one of continuous development.
We therefore reserve the right to amend specifications without notice or obligation.

Terms & Conditions.
 
 
  Introduction  
 
Shock Absorber
  Heavy duty shock absorbers incorporating high damping characteristics helps eliminate wheel hop.

Fully contained within the suspension, mounted between the front hanger and the spring seat they are protected from road damage. This also allows for a more compact design giving a shorter stroke which reduces heat and increases service life. For most applications the shock absorber can also act as a check strap.
 
Pivot Bush
  The exceptionally tough, metal encased Pivot Bush chosen for its very compact design, virtually eliminates rubber extrusion thus greatly extending its effective working life. The bonding of the bush material to the outer case and inner sleeve ensures the bush works in shear and cannot rotate. This compact design also permits front bracket reinforcing to be closer to the point of side load and reduces unwanted side movements.
Spring
  The shape of the spring contains the suspension geometry. Tecair I has a standard rating of 12 tonne which is specially designed for arduous applications.
Air Spring
  Using quality large diameter, low pressure air springs allow a reduction of the required air pressure at typical axle loads. A 4 bar system fed from a 6 bar air reservoir more readily maintains the correct ride height and trailer stability. With the air spring including an internal bump stop, a long service life is expected.
Axle Seat
  The design philosophy of the axle seat for Tecair I is allowing for ease of fitment of the shocker during servicing.
Axle
  The axle, which serves as a torsion beam, is manufactured from 127mm diameter seamless manganese alloy steel, its high strength and resistance to bending characteristics are a critical part of the design of Tecair air suspensions.
- 16mm wall thickness suitable for highway operations.
- 19mm wall thickness suitable for off-road operations.
 Download Product Brochures
 
 
 
     
Tecair1Tecair2Tecair ZDuratracRecair FB VRHAxle Lift
 
 
Duratrac (Fixed Welded Beam)
 
Technical Specification
Capacity 9-10 Tonnes Per Module
Standard Spring Center 220mm up to 460mm
Other ride height available on request
Axle Seat Suits 127mm diameter round beam
Tare Weights (Without lift) 120Kg (depending on right height)
Options Axle lift, Pneumatic Kits, Dump Kit
Raise/Lower/Hold, Pressure Rentention Kit,
Axle Load Indicator Kit
 
Underslung


Part No Description
63630117 220mm Ride Height Underslung (Drum)
63630118 240mm Ride Height Underslung (Drum)
63630119 260mm Ride Height Underslung (Disc)
63630120 260mm Ride Height Underslung (Drum)
63630121 300mm Ride Height Underslung
63630128 300mm Ride Height Underslung (Disc)
63630122 340mm Ride Height Underslung

Notes:

  1. Hanger Size shown not applicable to all Riding Heights.
Overslung


Part No Description
63630123 360mm Ride Height Overslung
63630124 380mm Ride Height Overslung
63630125 420mm Ride Height Overslung
63630126 460mm Ride Height Overslung

Notes:

  1. Duratrac Air Suspension - 5" Round Axle Beam.
  2. Standard spring center and air bag center are for axles with 1,850 track length and tyre size 10.00R20 or 11.00R22.5. Other axle track length or bigger tyre size will affect spring center and air bag center.
  3. All axles fitted are with long camshaft.
 
Duratrac Approved ADR No's
  Std. Opt.
Single Axles 816355 8219SS
Tandem Axle 816455 8220SS
Tri-Axle 816255 8221SS
 
back to top
 
 
 
   
 
Copyright © 2024. All rights reserved.